[40]Chunzhi Xia, Weiwei Sun, Yi Zhou, Xiangping Xu. Thermal fatigue damage and residual mechanical properties of W-Cu/Ag-Cu/1Cr18Ni9 brazed joint. Journal of Alloys and Compounds, 2018, 741:155-160.

[39]Yi Zhou,Chunzhi Xia, Jun Yang, Xiangping Xu and Jiasheng Zou. Investigation of microstructure and properties of W75-Cu/W55-Cu brazed joint with Cu-Mn-Co filler metal. Science and Engineering of Composite Materials, 2018, 25(1):17-23.

[38]C. Z. Xia, J. Yang, X. P. Xu and J. S. Zou. Microstructure and properties of W-Cu composite / Fe-based powder alloy vacuum brazed joint with different filler metals. High Temperature Materials and Processes, 2017, 36(5): 477-483.

[37]Chunzhi Xia, Lei Wu, Xiangping Xu, Jiasheng Zou. Phase constitution and fracture analysis of vacuum brazed joint of 50Mo-50Re refractory alloys. Vacuum, 2017, 136: 97-100.

[36]Chunzhi Xia, Lei Wu, Xiangping Xu, and Jiasheng Zou. Microstructure and fracture analysis of 50Mo-50Re alloys vacuum brazed joint with Fe-Si-B filler metal. Proceedings of IIW 2017 International Conference. June, 29-30, Shanghai, P. R. China. Page. F716-F721.

[35] Xiangping Xu,Chunzhi Xia, Weiwei Sun and Jiasheng Zou. Microstructure and performance study of brazing W-Cu/18-8 by improved NiMnSiCu-Zr rapid cooling solder. Proceedings of IIW 2017 International Conference. June, 29-30, Shanghai, P. R. China. Page. F704-F715.

[34]吴磊,夏春智,刘鹏.钼铼合金焊接技术研究现状.焊接, 2017, (2): 13-16.

[33] K. Feng, P. Liu,C. Xia, M. Cao, C. Jing, G. Zhang. Amorphization of Al-Cu-Mg alloys by friction stir welding. Kovove Materialy-Metallic Materials, 2017, 55(3): 169-173.

[32] Kun Liu, Yajiang Li,Chunzhi Xia, Juan Wang. Effect of bonding time on interfacial microstructure and shear strength of vacuum diffusion bonding super-Ni/NiCr laminated composite to Ti-6Al-4V joint without interlayer. Vacuum, 2017, 143: 195-198.

[31]C. Z. Xia,J. Yang, J. S. Zou, X. P. Xu.Influence of brazing clearance on microstructure and properties of W-Cu/1Cr18Ni9 steel brazed joint with Ni-Cr-Si-B amorphous filler metal. Kovove Materialy-Metallic Materials, 2016, 54(3): 159-165.

[30] Qiuhui Liang,Chunzhi Xia, Xiangping Xu and Jiasheng Zou. Research on vacuum brazing of W-Cu composite to stainless steel with Cu-Mn-Co brazing metal. Science and Engineering of Composite Materials, 2015, 22(3):245-250.

[29]杨骏,夏春智,许祥平,邹家生.不同钎料真空钎焊W‐Cu/Fe基粉末合金的接头组织与性能分析.第十二届华东六省一市焊接技术交流会. 2015年10月,青岛

[28]吴磊,夏春智,许祥平,邹家生.钼铼合金焊接技术研究现状.第十二届华东六省一市焊接技术交流会. 2015年10月,青岛

[27] Jianing Li,Chunzhi Xia, Peng Liu, Guanghui Pan, Congwei Wang. Physical properties and microstructure performance of ultrafine nanocrystals reinforced laser 3D print microlaminates. Journal of Alloys and Compounds, 2015, 645:504-508.

[26]C. Z. Xia, Q. H. Liang, J. S. Zou and X. P. Xu. Microstructural Investigation of W-Cu Composite and 1Cr18Ni9 Stainless Steel Brazed Joint with Ag-Cu Filler Metal. High Temperature Materials and Processes, 2014, 33(3): 293-298.

[25]夏春智,梁秋会,邹家生,许祥平.采用Fe基非晶钎料钎焊W-Cu复合材料界面组织与弯曲强度.焊接, 2014, (1): 39-42.

[24]夏春智,汪从喜,梁秋会,邹家生,许祥平. W-Cu复合材料与不锈钢真空钎焊材料研究.焊接, 2014, (9): 24-28.

[23]梁秋会,夏春智,邹家生,许祥平. W-Cu复合材料与不锈钢的真空钎焊材料研究.第十八次全国焊接学术会议. 2013年10月,南昌.

[22]C. Z. Xia, Q. H. Liang, D. F. Chen. Investigation of microstructure and properties near the interface of Copper/Aluminum brazed joint. Kovove Materialy-Metallic Materials,2013, 51(4): 235-239.

[21]夏春智,梁秋会,邹家生,许祥平.基于Fe基非晶钎料钎焊W-Cu复合材料界面组织与弯曲强度.第二十届全国钎焊及特种连接技术交流会. 2013年9月,西安.

[20]夏春智,许祥平,邹家生.工科高校特色专业人才教育教学的实践与思考—以 焊接技术与工程专业为例.新校园, 2013, (11): 46.

[19]梁秋会,夏春智,许祥平,邹家生.不同钎料真空钎焊W-Cu/18-8钢接头组织与性能分析.焊接技术,2013, 42(9): 14-17.

[18]夏春智,李亚江,王娟.粉末高温合金焊接的研究进展.焊接, 2012, (3): 14-17.

[17] Y. J. Li,C. Z. Xia, J. Wang. Stress distribution near the diffusion bonding interface of Fe3Al and Cr18-Ni8 stainless steel. Kovove Materialy-Metallic Materials, 2012, 50(3): 193-197.

[16]夏春智,梁秋会,李亚江. Cu/Al直接钎焊接头组织性能研究.第十六次全国焊接学术会议. 2011年10月,镇江.

[15]Xia Chunzhi, Li Yajiang, Wang Juan, et al. Studies on weldability of nichrome-laminated powder alloy using TIG welding. Kovove Materialy-Metallic Materials, 2010, 48(4): 257-263.

[14]Xia Chunzhi, Li Yajiang, U.A. Puchkov, et al. Microstructural study of super Ni laminated composite/1Cr18Ni9Ti steel dissimilar welded joint. Materials Science and Technology, 2010, 26(11): 1358-1362.

[13]夏春智,李亚江, U.A. Puchkov,王娟. Super-Ni叠层复合材料与18-8钢TIG焊接头区显微组织的研究.中国有色金属学报, 2010, 20(6): 1149-1154.

[12]李亚江,夏春智, U.A.Puchkov,王娟. Super-Ni/NiCr叠层复合材料与18-8钢的焊接性.焊接学报, 2010, 31(2): 13-16.

[11]李亚江,夏春智,石磊.国内镍基高温合金的焊接研究现状.现代焊接,2010, (7): 1-4.

[10]Xia Chunzhi, Li Yajiang, U.A. Puchkov, et al. Crack Analysis near the Vacuum Brazing Interface of Cu/Al Dissimilar Materials using Al-Si Brazing Alloy. Materials Science and Technology, 2009, 25(3): 383-387.

[9]夏春智,李亚江,王娟.基于Sn-Pb钎料的Cu/Al钎焊接头组织结构分析.焊接, 2009, (3): 42-45.

[8]李亚江,夏春智, U.A.Puchkov,陈谦.高能束流焊接技术在航空发动机耐热材料中的应用.航空制造技术, 2009,(8): 42-46.

[7]李亚江,夏春智, U.A.Puchkov,王娟.Super-Ni叠层材料与1Cr18Ni9Ti钢焊接性的研究.中国科技论文在线学报, 2009, 4(4): 253-258.

[6] Juan wang, Yajiang Li,Chunzhi Xia. Stress Distribution at Diffusion-bonded Interface of Fe3Al with Cr18-Ni8 Steel. China Welding, 2008, 17(3): 46-50.

[5]Xia Chunzhi, Li Yajiang, U.A. Puchkov, et al. Microstructure and phase constitution near the interface of Cu/Al vacuum brazing using Al-Si filler metal. Vacuum, 2008, 82 (8): 799-804.

[4]夏春智,李亚江,王娟. Cu/Al异种金属连接的研究现状.焊接, 2008, (1): 17-20.

[3]Xia Chunzhi, Li Yajiang. Wang Juan, et al. Microstructure and phase constitution near interface of Cu/Al vacuum brazing. Materials Science and Technology, 2007, 23 (7): 815-818.

[2]夏春智,李亚江,王娟.工艺参数对Fe3Al／Q235扩散焊接头应力分布的影响.焊接技术, 2006. 35(5): 10-12.

[1] Yajiang Li, Juan wang,Chunzhi Xia.Interface Microstructure and Diffusion Mechanism in the Diffusion Bonding of Copper and Aluminum. International Journal for the Joining of Materials,2006, 18(3-4): 94-98.